How to use PET braided sleeving to extend life?

Pet Braided Sleeving management is a set of flame retardant and halogen-free performance sleeving, according to the selection of PET braided, with good flexibility, flame retardant level, grinding performance and fire resistance, but also according to user needs to weave different styles and tones of the sleeving. In particular, the braided tube structure can be expanded to 1.5 times larger than the original specification, which is more suitable for encapsulated electronic wiring harness.

1. Lift the edge of the screen frame like a leather pad, so that the friction of PET Braided Sleeving on the edge becomes soft friction. In other words, the friction between the center of Pet Sleeving and the lining is more serious, and the actual effect of this piece of screen is just poor. Therefore, the five centimeters of the PET sleeving center are separated by eraser pads. In this way, the forced friction between the PET Braided sleeving and the edge of the mesh and PET braided sleeving is reduced, which can improve the service life of the PET braided sleeving in the original three to five times.

2, PET braiding sleeve management manufacturers screen mesh number is determined by the wire distance and diameter, braiding line at the moment we need to make clear that the diameter will not change under the condition of increasing the wire distance, and then is to use high strength PET braiding sleeving, PET braiding sleeving is not easy to grind the screen in a short time.

3. In the process of some highly detailed gluing overworry, Pet Braided Sleeve management is often damaged from the edge and the middle. Because the number of PET braided sleeving used for porcelain paste is many and the price is expensive, saving PET braided sleeving is to save the product cost.

Ingot number refers to the number of thread woven by the braided sleeve management, each kind of ingot number of PET braided sleeving should be used to match the number of ingot braided loom; The simple way to determine is to cut down a number of PET filament total, or use the same section of PET filament stock.
Contact Hyh