Common questions about the use of braided sleeving

The force working ability of braided casing first lies in the inner layer and the middle braided layer. If the installation is unreasonable in the whole process of application, it will cause cyclone channelled into the inner layer between the inner layer and the outer layer. At the moment, the rubber hose is stressed by the outer layer, which will lead to a substantial reduction of the force working ability of braided casing manufacturers, leading to the collapse of the pipe body.

Braided sleeving if the application of jacket type quick joint, or the application of burr or burr threaded joint/throat collar, will be very likely to lead to braided casing pipe body disassembly layer cracking.

We can see that when the jacket type quick joint is inserted into the braided casing, the key depends on the outer sealing, which is very easy for the steam body to channeled from the inner layer, resulting in the demolition of the outer engineering blasting pipe body.

Minimize the use of braided pipe by the outer layer to seal the jacket type quick joint.
If the outer layer of the braided casing is found to be cracked or the pipe identity level is found in the whole process of application, please check whether the jacket quick connector and its connector and throat hoop are burrs.
If the jacket type quick connector is to be used, a single - sided PU tube with double fish head is proposed if the working pressure permits.

1. When inserting the threaded joint, please do not apply vegetable grease or heat the threaded joint of the rubber hose. Please use a small amount of warm water to warm the hose before installing.
2. Apply a connector of appropriate rubber hose specifications, cut the wound and insert the rubber hose as far as possible. Note that no frills, burrs, scars or corroded connectors should be used.
3. Please apply throat band with appropriate size, and do not use fake and shoddy throat band containing burrs and frills.
4. Prevent the use of steel wire instead of throat hoop, prevent too much tight hose.
5. Braided casing should not be applied with jacket type quick joint, otherwise it is easy to cause the tear down of rubber hose.
contact hyh